We are hosting two weddings in our barn this year. So far we have hosted one wedding in the barn so we don't have alot of experience or client resources. The bride from our upcoming wedding asked whether we had a "floor plan" as they wanted to do some venue planning. As it happens, we don't have a floor plan but I said I could make one. I just sent her a floor plan I created this morning which she was ok with. I thought I would blog on some of the issue I ran into in coming up with a floor plan.

The first step in creating a floor plan was to take some measurements so I could create a spatially correct representation of the wedding event space. The wedding area does not consist of the whole barn so I didn't take measurements of the whole barn area, just the areas where the wedding would be taking place; what I refer to above as the "wedding event space". Also, there are three levels to the barn, so I only took measurements for the first level so far. It is a smaller wedding so the second and third levels will likely not be used.

The first measurements I made were the inside perimeter measurements. I deemed it necessary to indicate where all the doors were on the perimeter but not where all the windows were. These can be added in the future if needed. After getting the measurements for the main doors and perimeter I took some measurements for the distance and size of the stairs leading to the second level as this takes up quite a bit of space on the first level. I decided not to be too concerned about being completely accurate in my measurements and often rounded to the nearest foot or half foot.

Once I had some measurements, I had to figure out how to diagram the floor plan. I looked into some software but decided that route might take too long so I resorted to using graph paper. Standing at the front sliding door of the barn, I knew the width measurement of the event space (53.5 feet) was greater than the depth measurement (41 feet) so I knew the graph paper would be oriented in landscape mode for the floor plan. There were 40 squares on the longest side of the graph paper so I divided 40 by the length of the longest side of the event space (53.5 feet) and got the conversion factor I would apply (40/53.5) = 0.784 to all my foot measurements to get the number of grid squares it corresponded to. I then multiplied the longest depth measurement (41 feet) by the conversion factor (0.784) = 32.144 which I rounded to 32 squares. Luckily I had just enough squares running in the vertical orientation to accommodate the conversion factor so it worked out well; otherwise, I would have to estimate a smaller conversion factor that might work. Coming up with a good conversion factor between your measurement unit (feet or meters) and the corresponding size of a grid unit is critical. In my case 1 foot equaled .784 of a grid unit which is close to .75 or 3/4 of a grid unit.

Once you have your conversion factor you can draw the perimeter of your floor plan in a roughly accurate manner by converting each length measurement into the number of grid units (and partial grid units) it corresponds to. A roughly accurate floor plan was good enough for what I wanted the floor plan for but if I needed it to be more accurate I could record my length measurements more accurately (to the nearest 1/2 inch say) and graph the converted numbers more accurately (1 foot = .784 of a grid unit rather than .75 of a grid unit).

A floor plan can be developed iteratively. I took enough initial measurements to get the overall shape of the event space and the location of some main doors and the stairs. I plotted the points where these measurements began and ended and then used a ruler to draw lines through the points. I realized that I was missing measurements for a number of non-primary door locations and went back to the barn to get the measurements of where they were located and how wide they were. I also needed some more measurements to precisely locate the stairs on the floor plan.

Below are the two documents I started with. The top document is a basic outline of the event space based on the first set of measurements I took which are recorded in the second document. I eventually added more doors and the stairs to the top document and added more measurements to the bottom documents to properly graph them. Don't be surprised if you find the process of floor planning to be an iterative process of updating your floor plan and the document containing the measurements that it is based on.

The next issue I ran into was how detailed you want your floor plan to be. Should all the doors be labelled with meaningful names or just letters? Should stairs and the head table area be labelled as such? Should the main entrance and exit points be labelled as such? This is when I decided I wanted to create a bare bones "base floor plan" that did not include any labeling and only include the most necessary aspects of the floor plan. I could always begin with this floor plan and add details to it in various ways for different purposes. What I did was I put my base floor plan in my printer and clicked the copy button. I then took the copy and marked it up with labels. It looked sloppy on the first copy so I made another copy and added labels again. That copy was a bit better but had some issues so I made another copy and added labels which was good enough that I took a photo and sent it to the client who was happy with the floor plan diagram. I also sent along a photo of what an actual wedding setup looked like in the barn so the floor plan was paired with some photographic imagery.

I realize there are good software solutions for the problem I was trying to solve and eventually I may digitalize my floor plan in software that will take my measurement info and create a perfect floor plan representation from it. If you find yourself in a situation similar to mine where you want to create a quick low tech solution then some of my suggestions above might be helpful in your efforts. The main suggestions are: measure the perimeter and main features first, decide the level of accuracy you require, if using graph paper figure out the conversion factor from your measurement unit (e.g., feet or meters) to a grid unit, graph your measurements, create a base floor plan without labels, make a copy of the base floor plan and apply labels and other details to that version of your floor plan to achieve a final result.

Low tech floor planning is a useful skill to have and can make you look more professional in your interactions with clients and regulators. If you are doing a renovation, you might want to follow this approach to creating a floor plan of your renovation. We eventually intend to use the event space for selling wine and will need to send a floor plan to regulators detailing how we are strictly separating retail and hospitality areas from manufacturing areas of the barn. Having a simplified base floor plan without any labels is useful for creating floor plans that identify different features that are important to a particular clients interests in that space. Often these details can be added as "overlays" on top of the base floor plan. If you have a printer/scanner, you can achieve a similar result by printing out your base floor plan and marking it up with labels and other features for a final result.

Photo from first wedding we hosted in our barn

Last fall and winter I did work on clearing a new trail. The trail follows along a small stream that joins with other streams to form a fairly significant stream at the end. Where the stream crosses through a culvert to the other side of a road is where the trail ends and I can loop back to my place along the road and up our lane. I hope to christen the trail "Happy Trails" as it has the potential to be a good trail for getting some walking exercise that includes forest and stream bathing elements.

Creating a trail in fall and winter has the advantage that alot of growth has died back and new growth is not emerging quickly. It can create the illusion that you have built a trail and that it will be there to enjoy into the indefinite future. That is true to some extent, but as I learned yesterday it is amazing how quickly new growth can overtake and obscure the trail. The accessibility of the trail depends heavily on use. If I go on frequent walks on the trail, that will help to beat down the growth of softer vegetation that is overtaking the path in the boggier alder-filled parts. I can also be proactive on my walks and use a machete to beat back some of the prickly raspberry bushes taking over parts of the trail.

The trail does not exist as a finished product but as a route through nature that can degrade in accessibility if it is not used. The parts of the trail near boggier areas is undergoing rapid growth but the areas of the trail going through more wooded areas is still well defined as many of the trees there are evergreens and there is not as much new growth. I noticed that this part of the trail is being worn down by wildlife that finds this part of my path to be useful to travel on. In Permaculture we talk about using chickens, sheep, or pigs to do work that humans might otherwise have to expend alot of energy to do (e.g., take care of pests, mow grass, prepare earth for planting, etc...). Sometimes you can also enlist wildlife to help you with your projects in Zone 5.

In Permaculture, the landscape is zoned into parts that you access more or less frequently. Zone 1 might be the area immediately around your house, Zone 2 might be where your barn, garage and garden are, Zone 3 where you have some berry plants and fruit trees perhaps, Zone 4 your hayfields and some livestock, and Zone 5 is wild nature which you are supposed to learn from more that utilize just for resource purposes. This is one idealized version of a broad scale farm zoning scheme. The types of trails and paths you build may depend o the zone they belong to. Zone 1 trails might be paved over. Zone 2 trails might be gravel. Zone 3 and 4 might be determined by optimizing how machinery gets around those Zones. Zone 5, for me, is determined by staying close to natural attractions.

People often use metaphors to help them to understand the nature of certain aspects of the world. Trail building is one of those metaphors that gets used alot in business. We talk about new businesses "blazing a trail". As someone who blazed a stream side trail, I find it noteworthy that trails require traffic to maintain and improve in quality. The types of trails we built on the landscape depends of the frequency with which we expect to access different parts of the landscape. The frequency of usage helps determines the standard to which the trail should be built. Your driveway is used multiple times a day so some people like to pave it over. People also want to grow plants near their home so they don't pave all of zone 1. In business, different lines of business arguably belong to different zones and you might invest more or less effort to manage them. The manner in which they are built depends on what Zone they are built for (i.e., frequency of use and scale determine structure). Also, the trails we build to a the standard appropropriate to its frequency of use.

FLORIDA INVESTMENT NETWORK

Home

Contact

Entrepreneurs | Investors | About | Our Privacy Policy

© 2004-2024, Dealflow Solutions Ltd. All rights reserved.

Connecting Florida Entrepreneurs and Investors.