When we use the term design, perhaps a more accurate term would be redesign. Arguably, there is nothing "new" under the sun, so all acts of design are in fact acts of redesign.

If we take this perspective on design, then the starting point of design is not pure imagination working within imagined design constraints, but rather a deep study of existing designs with the goal of improving upon those designs in some way.

This idea of design as redesign occurred to me as I was trying to figure out how to re-implement an existing design for a field blueberry winnower. Here is how it currently works.

This clever design is a prime example of an appropriate technology that once existed and which isn't manufactured anymore. Because I am borrowing the cleaner, I am trying to figure out how to re-implement it. Discussion and schematics for building one of these can be found here.

As I performed my deep study of this blueberry cleaner I began to appreciate the minimalistic, compact, and interlocking elegance of the design. I began to notice, however, that the main functions of the field blueberry winnower could be performed in a different way and that the design could be improved upon. All unproven at this point.

Performing Functions In A Different Way

The blueberry field winnower performs two basic functions:

1. It provides a vibration function that keeps the blueberries rolling down an inclined plane that you pour your blueberries into.
2. It provides a blower function that operates upon the blueberries and the debris as they fall off the end of the vibration table. The blower ideally blows away all the debris while allowing the heavier blueberries to fall more vertically into your collecting container.

In the original design, both the vibration function and the blower function are powered by a small 3 hp motor with a pully that drives two pullies, one for each function.

A single belt from the drive pully wraps around the other two pullies to drive them.

Times have changed since this design was in manufacture. They probably didn't have cheap and easily accessible power generators like we have today. So, an alternative way we could power the blower and vibration functions would be via a generator with two plugins, one for the blower motor and one for the vibration motor. So instead of taking one machine to the field to clean blueberries, you would take your cleaner machine and a power generator. The cleaner does want to vibrate so you might have to weight down the table with an equivalent or greater weight to keep it from jumping all over the field on you. It works best if the cleaner is mounted directly on vibration absorbing earth rather than a wooden platform.

Improving On The Design

Once I imagined powering the two functions in a different way, the idea for an improvement began to form.

Instead of driving the vibration function and the blower function from the same pully, you could independently control the vibration speed and the blower speed. This would give you a greater ability to fine tune the two functions of the cleaner to maximize the efficiency and effectiveness of the cleaner.

Conclusion

This little case study of my journey to develop a field blueberry cleaner is meant to illustrate that redesign is often a better description of the design process. If you enjoy design, it is probably because you enjoy redesigning how things currently work rather than coming up with completely original ideas.

FLORIDA INVESTMENT NETWORK

Home

Contact

Entrepreneurs | Investors | About | Our Privacy Policy

© 2004-2024, Dealflow Solutions Ltd. All rights reserved.

Connecting Florida Entrepreneurs and Investors.